Many architecture offices have their own standards with regard to the order of sheets in a construction document set and most architects are quite opinionated about whether the Structural drawings belong before or after the Architectural drawings. However, American clients are starting to demand that architects follow the United States National CAD Standard. The information below is adapted from and meets the US National CAD Standard.
Components of the Sheet Number
There are three components that make up sheet numbers in a set of construction documents. The first two letters, the discipline designators, identify the construction discipline that the sheet covers - architectural sheets, plumbing sheets, structural sheets, etc. The third digit, the sheet type, is a number that represents the type of drawings that are on the sheet - plans, sections, details, schedules, etc. The final two digits, the sequence numbers, are numbers that simply place the sheets in order.
Each component is explained in more detail below.
The discipline designator helps to identify the type of work that is included on the sheets. Since sheets are distributed to the different sub-contractors in the field, it is helpful for the drawings to be organized by discipline. Therefore, the plumbing contractor can easily take a set of "P" drawings, which has all of the plumbing drawings (plans, schedules, details, etc), and they will not have to sift through the unrelated electrical or structural drawings.
The discipline designator can be a single letter or a double-letter. Very large or complex projects will want to make use of the double-letter designations to help sub-divide each discipline further. For instance, on a complex hospital job with hundreds of sheets, it may be helpful to separate the electrical lighting drawings from the electrical power drawings. On a small residential project with a few dozen sheets, it is probably easy to have the lighting and power on the same sheet or sequential sheets.
The following table indicates the primary (single) letter designations that may be used and the order that the disciplines should take. In this case, a hyphen shall be inserted in place of the secondary discipline designator so that the format remains. The second letter designators can be found in the US National CAD Standards.
|G||General||Sheet list, symbols, code summary, etc.|
|H||Hazardous Materials||Abatement, handling, etc.|
|V||Survey / Mapping|
|R||Resource||Existing conditions / buildings|
|Z||Contractor / Shop Drawings|
The Sheet Types designator takes the drawings of a single discipline and organizes them. Drawings are always organized from most general to most specific or specialized. Since plans are most helpful to see the overall design of the project, they come first. Elevations and sections are a bit more specific and come next followed by details and schedules, which are the most specific type of drawings.
|0||General: Symbol legend, abbreviations, general notes|
|4||Large Scale Drawings: plans, elevations, sections (NOT details)|
|6||Schedules and Diagrams|
|9||3D drawings: isometric, perspective, photos|
The final component of the sheet number is the two-digit sequence number, which is between 01 and 99. The sequence numbers do not have to be sequential so that space may be left within the set for future additions.
Example Sheet Numbers
|AD107||Architectural Demolition Floor Plan, seventh sheet|
|A-204||Architectural Elevations, fourth sheet|
|I-316||Interior Section, sixteenth sheet|
|QH601||Hospital Equipment Schedule, first sheet|
|FA601||Fire Alarm Diagrams, first sheet|
|P-102||Plumbing Floor Plan, second sheet|
|MH402||Large Scale HVAC Drawings, second sheet|
|MP501||HVAC Piping Details, first sheet|
|EP110||Electrical Power Plan, tenth sheet|
|EL103||Electrical Lighting Plan, third sheet|
|T-505||Telecommunications Details, fifth sheet|
|RA102||Architectural Existing Building Plan, second sheet|